Suggested retail price
Technology
Aluminium heat exchanger with hydrophilic coating
Improved wettability of the heat exchanger aluminum plates which have a special coating with a hydrophilic layer, ensuring rapid removal of condensate from the indoor unit that does not allow to quickly form of mold and bacteria, providing a more efficient operation of the air conditioner.
Dry Mode
Dry mode automatically selects cooling, based on the difference between fixed and temparaturoy actual room temperature. The temperature is regulated while reducing humidity repeated switching on and off of the cooling and ventilation only. when the dry mode on the remote control shows "Drop"
Flexible Air Intake Ways
Air inlet from back standard and from bottom optional. The size of the plate from bottom and flange from back is the same, it’s easy for installer to change the air inlet from back to bottom.
Multi-Bend Heat Exchanger
Increased heat. This unit uses the heat exchangers with tubes of a special design, the inner surface of which has trapezoidal notches "Innergrove cooper", which provides maximum heat transfer surface area increased. Due to this heat increases by 28%, reduced power consumption, and hence increases the efficiency of the system.
Description
-
Compact dimensions - Height only 210 mm (models 22-56) or 270 mm (models 71-112).
-
The indoor unit is equipped with a built-in electronic expansion valve.
-
Ease of installation - There is a fresh air intake opening and air inlet flanges, equipped for easy connection of air ducts. In the standard version, the air intake is located at the rear; In addition, the intake of air from below can be organized.
-
The standard filter is installed in an aluminum frame, which is removed by moving down from the bottom of the case.
-
An integrated drainage pump for condensate drainage with a head height of 750 mm simplifies the organization of the drainage system.