Multi-split systems - air conditioners is one external and multiple (in this case – 4 indoors) connected in parallel (separated pipes) to the indoor units. Such conditioners enable you to optimize space on the facade, without cluttering up his outdor units. In all areas is the possibility of individual adjustment of microclimate. Multisplit system - is air conditioning for small houses or flats big square, but distance from the outdoor unit to each of the internal do not exceed 11 m (or subtotal lenght not above 45m). Free-match principle of selection indoors units already agree into this serie.
1 drive 4
Series:
Outdoor units of multi-split systems are available in 5 standard sizes and allow you to create the optimal configuration for each specific facility, along with various types and models of indoor units.
Systems with four indoor units are equipped with reliable DC-inverter compressors with reduced noise levels and a wide range of compressor speed adjustment. To effectively control the operation of the system, an original and reliable algorithm was used to coordinate the operation of the compressor, fan motor and electronic expansion valves.
Outdoor units of multi-split systems are available in 5 standard sizes and allow you to create the optimal configuration for each specific facility, along with various types and models of indoor units.
Systems with four indoor units are equipped with reliable DC-inverter compressors with reduced noise levels and a wide range of compressor speed adjustment. To effectively control the operation of the system, an original and reliable algorithm was used to coordinate the operation of the compressor, fan motor and electronic expansion valves.
A wide range of indoor units by type and performance.
Up to 5 indoor units of various types (wall, cassette 600х600, channel and floor-ceiling) can be connected to multisystems.
Simultaneously, the units can operate only in one mode - cooling or heating, but in each room it is possible to set and maintain individual air parameters. DC inverter control of the compressor motor and outdoor fan provides high energy efficiency and economy of the system.
A wide range of indoor units by type and performance.
Up to 5 indoor units of various types (wall, cassette 600х600, channel and floor-ceiling) can be connected to multisystems.
Simultaneously, the units can operate only in one mode - cooling or heating, but in each room it is possible to set and maintain individual air parameters. DC inverter control of the compressor motor and outdoor fan provides high energy efficiency and economy of the system.